Kitchen Cabinet Painting
Las Vegas & Henderson, NV
A New Kitchen for a Fraction of a Remodel
Your cabinets are probably fine. They’re just the wrong color.
If the boxes are solid and the doors still hang straight, ripping them out is spending remodel money to solve a paint problem. LV Handyman Pro has spent 10 years repainting kitchen cabinets across Las Vegas and Henderson, turning dated honey oak and builder-grade maple into clean, modern finishes — usually in under a week, and for a fraction of what new cabinetry costs.
What’s Included
- Free in-home estimate and finish consultation
- Full kitchen containment, floors, counters, and appliances protected
- Hardware removal, labeling, and reinstallation
- Deep degreasing, sanding, and bonding primer
- Sprayed cabinet-grade enamel for a smooth, factory-style finish
- Hinge, pull, and knob upgrades if you want them
- Complete cleanup and a walkthrough before we leave
Call or text (725) 324-4279 for a free estimate.
Painting vs. Refacing vs. Replacing
Most homeowners calling us have already gotten a $25,000 cabinet replacement quote and are looking for another option. Here’s the honest comparison:
Replacing
New boxes and doors. Makes sense if your cabinets are water damaged, falling apart, or the layout genuinely doesn’t work. It’s the most expensive option by a wide margin and takes weeks.
Refacing
New doors and drawer fronts with veneer over the existing boxes. Middle of the road on price. Worth it if your doors are damaged but your boxes are solid.
Painting
Your existing doors and boxes, stripped back and refinished. The least expensive of the three, the fastest, and the option that makes sense for the majority of Las Vegas kitchens, because most valley cabinets are structurally sound solid wood or plywood boxes that were simply finished in a color nobody wants anymore.
We’ll tell you straight during the estimate which one your kitchen needs. If your cabinets aren’t good candidates for paint, we’ll say so rather than take the job and hand you a finish that fails.
Why So Many Las Vegas Kitchens Are Perfect Candidates
The valley’s building boom means an enormous number of homes here were finished between the mid-90s and late 2000s with the same handful of cabinet packages, honey oak, golden maple, or dark cherry stain, all with heavy grain and a yellowed clear coat that’s only gotten more orange with age. The boxes are typically solid. The style is what’s dated.
Cabinet painting is the right call when you want to:
- Get rid of orange-toned oak without touching the layout
- Brighten a kitchen that feels dark and closed in
- Update before selling, repainted cabinets photograph dramatically better in listings
- Go two-tone with a contrasting island
- Match cabinets to a new countertop or backsplash you just installed
- Modernize a rental or flip on a controlled budget
What We Can and Can’t Paint
Solid Wood and Plywood Cabinets
The ideal candidate. Oak, maple, cherry, birch, and painted wood all take a new finish beautifully with proper prep.
Open-Grain Oak
Oak has deep grain that telegraphs through paint. Some homeowners like the texture showing; others want a perfectly smooth modern look. If you want the grain gone, it takes a grain-filling step before priming. That’s extra labor and we quote it separately, but we’ll show you the difference so you can decide.
MDF and Laminate Doors
Paintable with the right bonding primer. Very common on newer builder-grade cabinets and they usually finish out beautifully because the surface is already smooth.
Thermofoil, Read This One
Thermofoil is a vinyl film heat-wrapped over MDF, and it’s common on Las Vegas cabinets from the 2000s. If the film is intact and well bonded, it can be painted with a specialty bonding primer. If it’s peeling, bubbling, or lifting at the edges, which usually happens above the dishwasher or next to the oven from heat, paint will not fix it. The right answer is replacement doors on your existing boxes, which we can handle. Any company that promises to paint over peeling thermofoil is setting you up for a callback.
Our Cabinet Painting Process
Cabinet finishes fail for one reason: skipped prep. Kitchen cabinets live in the greasiest, most-touched, highest-wear environment in your house. Here’s how we make a finish that holds up.
1. Free Estimate and Finish Consultation
We look at your cabinet material, the condition of the existing finish, your door style, and how the hinges are mounted. You get a written itemized estimate and a realistic timeline, plus a straight answer on whether paint is the right move at all.
2. Color and Sheen Selection
Whites and warm off-whites remain the safest resale choice. Greige and soft greens have taken over from gray. Two-tone kitchens, lighter uppers with a deeper island or base run, are the most requested look in the valley right now. On sheen, we generally recommend satin or semi-gloss for cabinets: it wipes clean, resists fingerprints, and holds up around the stove. Fully matte cabinets look great in photos and show every handprint in real life.
3. Teardown and Labeling
Doors and drawer fronts come off, hardware comes out, and every piece gets numbered so it goes back exactly where it came from. Nothing gets mixed up and nothing comes back hanging crooked.
4. Degreasing and Deglossing
This is the step that separates a finish that lasts a decade from one that peels in a year. Years of cooking oil vapor settle into cabinet surfaces, especially the uppers around the range and the doors right below the cooktop. Every surface gets thoroughly degreased, then sanded or chemically deglossed so the new finish has something to grab.
5. Bonding Primer
A dedicated bonding primer goes on next, tinted toward your final color. On dark stains and red-toned woods like cherry, we use a stain-blocking primer so tannins cannot bleed through and yellow your white cabinets months later.
6. Spray Application
Doors and drawer fronts are sprayed off the cabinet in a controlled setup so they lay flat and level out smooth. Boxes and face frames are sprayed in place with the kitchen fully masked off. We use a cabinet-grade waterborne enamel that levels like lacquer and cures to a hard, washable finish, not wall paint, which will never survive on a cabinet door.
7. Reassembly, Hardware, and Walkthrough
Doors go back on their numbered spots, hinges get adjusted so everything sits square and closes clean, and hardware goes on. If you are upgrading to new pulls, knobs, or soft-close hinges, we drill and install. Then we walk the kitchen with you before we pack up.
8. Cure Time, What to Expect
Your cabinets are dry to the touch in hours and back in service the same day we reassemble. But enamel keeps hardening for about two to three weeks after application. During that window, close doors gently, skip harsh cleaners, and do not stack heavy items against fresh surfaces. After it fully cures, you have a finish you can scrub. We leave you written care instructions.
Hardware, Hinges, and the Small Repairs Nobody Else Does
We are a handyman company, which changes what happens when your kitchen has problems beyond color. Drawer slides that stick, a door that has not closed right in three years, a cabinet bottom soft from an old sink leak, missing filler pieces, a toe kick that is separating, we fix all of it during the same project instead of painting around it.
We also handle:
- Soft-close hinge and drawer slide upgrades
- New pulls and knobs, including drilling for a different hole pattern
- Replacement doors for thermofoil or damaged fronts
- Adding crown molding above upper cabinets
- Cabinet interior painting or shelf lining, if you want it
- Bathroom vanity refinishing to match your kitchen
That last one comes up constantly. Most homeowners who repaint kitchen cabinets end up wanting the vanities done too.
Why Homeowners Choose LV Handyman Pro
- 10+ years refinishing cabinets in Las Vegas and Henderson
- Licensed and insured
- 5-star rated by local homeowners
- Sprayed finishes, not brush marks
- Full prep every time, degrease, sand, bond prime, no shortcuts
- Free written estimates with an honest assessment of your cabinets
- Handyman and painting under one roof, repairs handled in the same visit
- Locally owned and operated, not a franchise
Areas We Serve
Kitchen cabinet painting throughout the Las Vegas valley:
- Las Vegas, NV
- Henderson, NV
- North Las Vegas, NV
- Summerlin
- Green Valley
- Anthem
- Enterprise
- Spring Valley
- Boulder City, NV
Not sure if you are in range? Call and ask. If we can get there, we will come out.
Get a Free Cabinet Painting Estimate
The fastest way to know what your kitchen would cost is to have us look at it. We will assess your cabinet material, talk through colors and finishes, and give you a written number with a real timeline. No obligation, no pressure.
Call or text (725) 324-4279, or send us a message and we will get back to you.
Repainting your interior doors at the same time? See my door painting service. For broader budgeting, see typical handyman costs in Las Vegas.
Licensed Insured Background-Checked
Free In-Home Estimate
Send photos of your kitchen or book a walkthrough. You get a written, itemized number and a real timeline before any work starts.
Frequently Asked Questions
How much does it cost to paint kitchen cabinets in Las Vegas?
Price depends on how many doors and drawer fronts you have, the cabinet material, whether the boxes and interiors are included, and whether the finish needs grain filling or extra prep. A small galley kitchen and a large kitchen with an island are very different jobs. We give free on-site estimates so the number you get is the number you pay. What we can tell you is that painting consistently comes in well below refacing and dramatically below replacement.
How long does cabinet painting take?
Most kitchens take 3 to 5 working days from teardown to reassembly. Larger kitchens, grain filling, or heavy repairs can push it to a week. We give you the schedule with your estimate.
Can I use my kitchen while you are working?
Partially. Your appliances, sink, and counters stay usable for most of the project, but doors and drawer fronts will be off for several days and the work area gets masked off. We recommend clearing counters and planning for simple meals that week.
Do I need to empty my cabinets?
Yes, please empty everything before we start, dishes, food, glassware, all of it. Prep work creates dust, and if you want the interiors painted we need clear access to every shelf. We give you notice so you have time.
Do you spray or brush the cabinets?
We spray. Doors and drawer fronts come off and get sprayed flat so the finish levels out smooth, and boxes and face frames are sprayed in place behind full masking. Brushing cabinets leaves visible strokes no matter how good the painter is.
Will the wood grain show through?
On oak, yes, unless you pay for grain filling. Oak has deep open grain that reads through paint. Some homeowners love the texture. If you want a perfectly smooth modern finish, we add a grain-filling step and quote it separately. Maple, birch, MDF, and laminate all finish out smooth without it.
Can you paint laminate or thermofoil cabinets?
Laminate and MDF, yes. With the right bonding primer they often come out beautifully. Thermofoil depends on condition. Intact thermofoil can be painted with a specialty primer. Peeling or bubbling thermofoil cannot, and anyone who tells you otherwise is selling you a callback. In that case replacement doors on your existing boxes are the right fix, and we handle that too.
How durable is a painted cabinet finish?
With proper prep and a cabinet-grade enamel, a professionally painted kitchen holds up for many years of normal use. Failures happen when someone skips degreasing, skips the bonding primer, or uses ordinary wall paint. All three are why DIY cabinet jobs so often peel at the door edges within a year.
Can you paint my bathroom vanities to match?
Yes, and most customers add them. Vanities use the same process and are a much smaller job when we are already set up.